Magical use of external magnetic horn magnet
External magnetic speakers are often damaged in the use of speakers, and are usually discarded due to difficult maintenance and low maintenance value. In fact, the magnet of the speaker can be used for waste, that is, the speaker is directly upside down on the table for other purposes.
1. Mouth-down buckle placed on the table as a magnetized seat for the water cup. Magnetized water has a certain health effect, but it needs to use a magnetized cup with a magnet inside. Judging from the various types of magnetized drinking cups I touch, most of the appearance is acceptable but the inside is rough. Some just put a small piece of inferior magnet outside the cup and the magnetization can be imagined. In fact, we can use ordinary glasses or tea cups on the horn magnet to achieve the effect of water in the magnetized cup. Due to the large magnetic leakage and strong magnetism of the external magnetic horn magnet steel, it can be used as a high-quality magnetization source for magnetizing water. When using, just put the cup on the magnet. If the magnetic steel is attracted to the tap water pipe near the water head, the tap water can also be magnetized.
2. Screws, small objects collector. When repairing electrical appliances, many screws, washers and various small parts are often removed. Most of them are made of iron, just suck it on the horn magnet and it will be safe. Office pins, paper clips, etc. can also be sucked on the spare.
3. As a magnetization source for Hall element IC, reed switch, etc. detection.
4. As a temporary magnetization source without magnetic screwdriver. The heads of some screwdrivers are non-magnetic, which causes inconvenience for screw installation. At this time, as long as the screwdriver head is attracted to the most magnetic part of the horn magnet edge a few times, you can immediately get magnetic. It is also effective to magnetize screwdrivers that lose their magnetism, which is convenient and practical.
5. Strong fixing platform for iron parts maintenance or welding. Some iron parts or circuit boards with iron parts are difficult to fix during maintenance, which causes inconvenience to maintenance. If you suck them on the speaker magnet, it will bring great convenience.
6. Cooperate with a small iron plate as a pressing tool when bonding small parts with universal glue. Universal adhesives require a certain amount of pressure and time when bonding parts to obtain a good bonding effect. If you use a small iron plate as a pressure tool with a horn magnet, you can complete this work well.
7. Place the rack as an electric soldering iron. In the maintenance work, the electric iron generally needs to be placed on a special bracket, and the new electric iron is usually not equipped with a shelf. In fact, it is entirely possible to stick a small piece of iron sheet, coiled wire or heat into an iron self-tapping screw at the appropriate position of the handle part of the soldering iron, and then suck it on the horn magnet to make the soldering iron in It can be placed in the air in all directions, which is both practical and innovative.
8. Make a table lamp bracket. The base of some small desk lamps is small, and it is easy to tip over during use. If the bottom plate is made of iron, it can be directly sucked on the horn magnet steel, which not only increases the height, but also is stable and reliable. If it is plastic, you can use a large stationery clip to clamp it, and then suck it on the speaker magnet.
Parabolic Reflex Reflector,Parabolic Grow Reflector,Aluminum Lamp Reflector,Safety Lighting Covers
Yangzhou Huadong Can Illuminations Mould Manufactory Co., Ltd. , https://www.light-reflectors.com