Can I use my own diluent or buffer for sample analysis? -Huaqiang Electronic Network

Factory direct sales - SMD aluminum electrolytic capacitor - straight plug solid capacitors, the products are imported from Japan, aluminum foil, high performance and long life.

Can I use my own diluent or buffer for sample analysis? Recently, Liao Hong conducted an experiment and contacted our company to ask whether it's possible to use personal diluents or buffers during sample processing. In response, Shanghai Jinma Bio has provided a detailed analysis method for everyone to refer to. Our reminder: Each kit comes with a pre-prepared dilution formula tailored for specific sample types, ensuring proper dilution of the samples being tested. Please consult the manual for more details. Since ELISA experiments are highly specialized, it is not recommended to substitute any reagents, such as diluents, as this could lead to experimental failure. Shanghai Jinma Bio recommends following these four key points to ensure accurate and reliable results: â—† Ensure that the sample is handled under aseptic conditions during collection and preparation. â—† If multiple samples are being tested, isolate and label them clearly to avoid cross-contamination. â—† Centrifuge the samples before testing to remove any particulate matter. Transfer the supernatant to a new centrifuge tube and mix thoroughly. â—† When mixing, use a centrifuge tube that is at least 50% larger than the sample volume to allow for proper mixing. With thousands of products available from Shanghai Jinma Bio, some items may not be listed online due to data limitations. If you can't find the product you're looking for on our website, please contact our customer service via phone or QQ. We are here to assist you and appreciate your continued support and trust in Shanghai Jinma Bio.