Come on, the free little partner answers the question of Xiao Bian: Do double 11 buy SSD let the computer experience the fly to catch the foot? Oh, if the previous answer is "no", then the next question, is there an idle USB (desktop) or SD card reader (notebook) on your computer? Is there an idle small-capacity U disk or SD card at hand? In some cases, we can also slightly accelerate the computer. Although we can not take off, it is not a big problem.
The knowledge of a small partner estimated to have already guessed, using U disk or SD card and other methods to accelerate the computer is ReadyBoost. This function built into the system from Windows Vsita mainly uses the high-speed random access capability of the flash media, allowing the U disk/SD card to act as a bridge between the memory and the hard disk. The small partner who still uses a mechanical hard disk can use this method. Slightly improve the speed of the system (U disk size is more than 256MB, the best and memory size is the same).
To say that the creation method is actually very simple, check the U disk to the USB port that is not commonly used on the desktop, or insert the idle SD card into the reader under the keyboard. Right-click on the U drive letter that appears in "This Computer" and select "Properties". As long as it is Windows Vista and above operating system (now the mainstream of Windows 7~10), you can see the ReadyBoost tab, and follow the Windows guidelines for setting up.
Of course, according to Xiao Bian's writing features, none of the above is the focus. Because of that, although anyone can use this function, if the computer is properly optimized, it cannot complete the creation process. The problem lies in a system service. If everyone has encountered a similar problem, it is necessary to look down.
Enter services.msc after Win+R,
To find Superfetch, right, that is, it will cause the Windows 10 disk to occupy 100% of the guys, in the previous optimization tutorial we usually turn it off, now want to set it to "automatic", restart and then follow the steps to create ReadyBoost.
If your computer is using the ReadyBoost function, the following figure shows the results, it proves that there is already SSD + high-speed memory, use this function is not a big bird, then do not be greedy!
Right Angle D-sub Connector IP66 IP67 Rated
IP66 / IP67 waterproof d-sub connectors-Designed for IP Performance
ANTENK has developed IP66 / IP67 waterproof d-sub connectors that utilize a proprietary sealing technology, which maintains the same physical size and footprint as standard d-sub products.
Antenk's line of Waterproof d-sub connectors utilize an innovative sealing technology eliminating the need to redesign enclosures and PC boards when implementing IP67 design upgrades.These connectors are designed for applications that require protection from heavy spray or are exposed to short-term submersion. Connectors are available in vertical and right angle board mount types as well as solder cup for panel mount cable applications. Standard D-Subs are available in 9 pin, 15 pin, and 25 pin positions, and high density D-Subs are available in 15 pin, 26 pin, and 44 pin positions
Applications of Antenk waterproof d-sub connectors:
Hand held computers, scanners, and printers that are used outdoors
Remote sensors, gauges, and data loggers that are used outdoors
Industrial and Medical equipment that is routinely subject to wash down
Transmitters and emergency beacons that are subject to temporary submersion
Gas, Electric, and Water metering systems that have embedded Smart Grid electronics
Portable electric generation equipment (Gen Sets)
Consumer and Commercial boating electronics (Radios, Scanners, Radar, DC Power Ports)
IP67 D-SUB | WATERPROOF CONNECTORS FEATURES & BENEFITS
Signal / Low Power in 6 standard size
(Standard: 9 pin, 15 pin, 25 pin; High Density: 15 pin, 26 pin,44 pin)
Combo-D / High Power in a variety of configurations:
(3W3, 5W5, 7W2, 9W4, 11W1, 13W3, 13W6, 17W2, 21W1, 21WA4)
Solder Cup, Vertical Mount & Right Angle Board Mount Options
High Reliability Screw Machined Contacts
3 amp / 5 amp / 20 amp / 40 amp Power Options
-65°C to +105°C Operating Temperature Range
Right Angle D-SUB Connector IP66 IP67 Rated available in
3 industry sizes/positions:Standard Density (9 pin, 15 pin, 25 pin).
Male & Female Versions
Right Angle D-sub Connector IP66 IP67 Materials
Shell: Steel with Nickel Plating.
Insulator: Glass-filled thermoplastic. U.L. rated 94V-O
(260° process temp for board applications)
Machined Contacts:
Male Pins - Brass
Plating: Gold Flash on entire contact.
IP67 Right Angle D-Sub Seal: Proprietary Information
Right Angle D-Sub IP67 Rated,Right Angle D-Sub Waterproof,Standard Density Waterproof Right Angle D-Sub Connector, High Density Waterproof Right Angle D-Sub Connector
ShenZhen Antenk Electronics Co,Ltd , https://www.atkconnectors.com