Product information
JetWave 2420/2420S IEEE 802.11b/g PoE Outdoor Wireless AP/Bridge New
![JetWave 2420/2420S IEEE 802.11b/g PoE Outdoor Wireless AP/Bridge]()
JetWave 2420/2420S IEEE 802.11b/g 800mw high power outdoor wireless application solution Wireless network coverage up to 5-10KM IP68 waterproof setting Suitable for outdoor installation Support multiple SSIDs, use SSID to define VLAN tag Wireless QoS priority (WMM) available Priority transmission video support AP, bridge, AP client and relay mode support WEP, WPA, WPA2 encryption and MAC address filtering provide higher security level Display Received Signal Strength (RSSI) Support 48VDC PoE power supply, can be powered by Power over Ethernet Range: -20~70°C Built-in 15dBi Panel Antenna (JetWave 2420) With N-Type External Antenna Interface (JetWave 2420S) ...........More JetWave 2450 IEEE 802.11b/g/n Outdoor Wireless AP/CPE New
![JetWave 2450 IEEE 802.11b/g/n Outdoor Wireless AP/CPE]()
JetWave 2450 IEEE 802.11n outdoor wireless application solution, backward compatible with 802.11b/g 3 times higher bandwidth than 802.11b/g wireless transmission protocol, net data transfer rate up to 150Mbps high performance, low maintenance cost solution for video surveillance network Stand-alone built-in 8dbi directional antenna and an N-Type external antenna interface Wireless network coverage up to 5KM Wireless QoS priority (WMM) Video transmission with priority support WEP, WPA, WPA2 encryption and MAC address filtering provide higher security support 12VDC PoE Power Supply, Power Supply over Ethernet Operating Temperature Range: -20~70°C Support STP Spanning Tree, IGMP Snooping, SNMPv3 Protocol...........more
Application case Wireless reservoir monitoring success scheme Korenix wireless products have been successfully monitored in a reservoir in Anhui Province, China. The system consists of two systems that are separated by about 7 kilometers. The reservoir monitoring end performs data on reservoir level, water quality, etc. Collecting summaries, the control center collects and analyzes the collected data and makes corresponding processing to achieve data monitoring and drought detection. Both sides of the data transmission can not be transmitted through the external network, nor the same network segment, must ensure the security and accuracy of the data. ...more
Professional Discussion JetNet 5628G meets the stringent requirements of substation applications through IEC 61850-3 & IEEE1613 substation standards!
The power transmission business is constantly facing new challenges and aims to provide end users with a reliable power supply system. For a variety of reasons, such as equipment failures, adverse environmental factors and the impact of unexpected events, as well as serious electromagnetic interference within the substation, it may cause the normal power supply service to be interrupted for a long time. Therefore, it is necessary to monitor each substation reasonably and effectively, and it is particularly important to provide a reliable and efficient substation network communication platform in extremely harsh environments. ...more
![JetNet 5628G IEC61850-3 24+4G Modular Managed Industrial Ethernet Switch]()
JetNet 5628G IEC61850-3 24+4G Modular Managed Industrial Ethernet Switch
The basic function of antenna is to receive and emit electromagnetic waves. Translating high-frequency current into electromagnetic waves while launching signal, and then translating electromagnetic waves into high-frequency current while receiving signal.
Our products are widely used. They are mainly used in a variety of wireless communication equipment, such as car navigation, terminal positioning, intelligent reading, image and data transmission and other aspects.
Our antennas have various kinds, beautiful appearance, easy installation and superior performance! Different antennas have different usage, such as the positioning antenna, the surface of antenna must be facing the sky while installing; sucker antenna must be attached to the metal surface; paste antenna must be attached to the glass and other non-metallic surface. And the most important thing is no matter what kind of antenna, they must stay away from sources of interference.
We have a strong development team, more than 20 years experience in the development and design of various antennas. We have a variety of testing equipment, such as microwave darkroom, CMW500, integrated test 8960, network analyzer, spectrum analyzer, noise tester, signal generator and other equipment. We have complete test equipment: such as high and low temperature impact box, vibration tester, salt spray test machine, tensile tester, and so on...; We have superb manufacturing processes, such as: automatic placement machine, Machine, automatic welding machine, automatic ultrasonic machine, automatic engraving machine, 3D printer and other related equipment.
Module Series
Module Series,GNSS Module,GPRS Module
Shenzhen DELIN Communication Technology Co., Ltd. , http://www.delinct.com