Skyworth TV can not boot how to do?

Skyworth TV can not boot too much trouble, I would like to repair it will not! Now, Xiao Bian introduces Skyworth TV users to the situation that four Skyworth TVs cannot be turned on and how to solve them. Helping Skyworth TV users complete repairs at home and turn everyone into a smart TV expert.



Skyworth TV can not boot how to do four situations solution

Skyworth TV can not boot how to do? Four situations solution!


Phenomenon 1: Skyworth TV restarts itself when watching, but it won't start up after rebooting, and the color of the power button is always red.


Solution: This phenomenon may be caused by a failure of the TV's secondary power supply or damage to the components of the load circuit. First open the TV to check whether the component is obviously damaged. Measure the output of the secondary power supply. Generally, the secondary power supply of the TV is very easy to be damaged. Just replace the power supply in time, and the components will be damaged. This is also the case.


Phenomenon 2: Skyworth TV can not be turned on for the first time when it is turned on, but it can be repeated for the second time.


Solution: When Skyworth TV cannot start, you can try tapping the TV lightly to see if the TV can be turned on. If the TV can be turned on, it means that the TV's wiring board has been spot welded. At this time, we only need to re-weld the TV's wiring board. Skyworth's TV cannot be turned off.


Phenomenon 3: Skyworth TV did not use the display of the power supply when it was turned on. This situation has caused Skyworth TV to fail.


Solution: It may be that the protection circuit of the TV has malfunctioned. At this time, it is sufficient to replace the fuse of the TV. However, if the screen of the TV does not respond, it may be that the television phenomenon is broken. Professionals repair your TV.


Phenomenon 4: Skyworth TV can't drive, but the TV's power light is bright.


Solution: First check if your remote control is normal. The remote control has a problem. You can press and hold the TV control button to debug.


Second, hold down the TV's TV/AV button to see if you can call up another mode. The TV has no image or standby pattern.

Outdoor Light Reflector

Outdoor Light Reflector,Aluminum Outdoor Light Reflector,Outdoor Metal Light Reflector,Outdoor Street Lighting Reflector

Yangzhou Huadong Can Illuminations Mould Manufactory Co., Ltd. , https://www.light-reflectors.com