Dp to VGA Cable with Chipset (Male to Female)

Displayport(DP) Male to VGA Female Cable Adapter

DisplayPort is designed to replace Digital Visual Interface (DVI) and Video Graphics Array (VGA), as well as replace internal digital LVDS links in computer monitor panels and TV panels. DisplayPort can also provide the same functionality as HDMI but is not expected to displace HDMI in high-definition consumer electronics devices.

The DisplayPort signal is not compatible with HDMI or DVI. However, dual-mode ports marked with a DP++ logo can transmit single-link HDMI and DVI signals through DisplayPort cabling; This requires passive external adapters which convert to the higher signal levels used by DVI/HDMI. Dual-link DVI and analog VGA are supported through powered adapters which perform active conversion.

This DisplayPort to VGA converter has many features that enable it to perform in a superior manner. Among those features you will find:
1. Display resolution up to:
1920x1200(WUXGA-R), 60Hz, 8bpc: 154MHz
1920x1080P, 60Hz, 10bpc: 144MHz
2. DisplayPort ver1.1: DP two lanes or DP one lane
3. RGB analog video(VGA port) output: Configured for 700mV voltage swing
4. Automatic sink detection and stand by mode
5. Spread spectrum (de-spreading) for EMI reduction
6. EDID Pre-fetch (VGA EDID Conversion)
7. Sink detection based on DDC return
8. Measured power: Active 1.4W, Standby 100mW
9. Power supply: +3.3V (Form DP) Displayport(DP) Male to VGA Female Cable Adapter

DisplayPort is designed to replace Digital Visual Interface (DVI) and Video Graphics Array (VGA), as well as replace internal digital LVDS links in computer monitor panels and TV panels. DisplayPort can also provide the same functionality as HDMI but is not expected to displace HDMI in high-definition consumer electronics devices.

The DisplayPort signal is not compatible with HDMI or DVI. However, dual-mode ports marked with a DP++ logo can transmit single-link HDMI and DVI signals through DisplayPort cabling; This requires passive external adapters which convert to the higher signal levels used by DVI/HDMI. Dual-link DVI and analog VGA are supported through powered adapters which perform active conversion.

This DisplayPort to VGA converter has many features that enable it to perform in a superior manner. Among those features you will find:
1. Display resolution up to:
1920x1200(WUXGA-R), 60Hz, 8bpc: 154MHz
1920x1080P, 60Hz, 10bpc: 144MHz
2. DisplayPort ver1.1: DP two lanes or DP one lane
3. RGB analog video(VGA port) output: Configured for 700mV voltage swing
4. Automatic sink detection and stand by mode
5. Spread spectrum (de-spreading) for EMI reduction
6. EDID Pre-fetch (VGA EDID Conversion)
7. Sink detection based on DDC return
8. Measured power: Active 1.4W, Standby 100mW
9. Power supply: +3.3V (Form DP)

10mm Green Through-Hole LED(DIP LED)

For the pin of 10mm Green Through-Hole LED, we also have a lots of choice on it. For example: 10mm Green Through-hole LED flat pin, 10mm Green Through-Hole Led curved pin, 10mm Green Through-hole LED braided pin ect.

For the bringhtness of 10mm Green through-hole LED, we have three level: common bright 10mm Green through-hole LED, Super Bright 10mm Green Through-Hole LED and ultra bright 10mm Green through-hole LED.

For the angle of 10mm Green through-hole LED, 15 degrees, 30 degrees, 45 degrees, 60 degrees, 120 degrees are available.

For the raw materials, we use the LED chip from Taiwan Epistar, Tyntek, Optotech. The stability of our products have been recognized by all of our custom. 

We supply kinds of 10mm Through-hole LED with different wavelength from 365nm to 1550nm, which include the visible LED and the invisible LED.
In this catalog, we mainly introduce the 10mm Green Through-hole LED.

10mm Through-hole IR LED , we supply 10mm Green LED with water clear lens, 10mm Green LED with diffused lens, 10mm Green LED with Green clear lens and 10mm Green LED with Green diffused lens. In addition, the shape can be 10mm round LED without flange(fringe), 10mm short head LED, 10mm bullet top green LED, 10mm round green LED with flange ect.

10mm Green Through-hole LED widely used for Green sign, display LED, indicator LED, die hole LED and 10mm round Green with lamp holder because of the high brightness and the small size.

10mm Green Through-Hole LED

10mm Green Through-Hole LED, Super Bright 10mm Green Through-Hole LED, Oval 10mm Green Through-Hole LED, Through-hole 10mm LED Diodes

Shenzhen Best LED Opto-electronic Co.,Ltd , http://www.bestsmd.com