- Model NO.: MGP-35N
- Conductor Circuit: as Per Client Requirements and Data
- Materials: Steel
- Style: as Per Client Requirements and Data
- We Can Design by Pls&Tower Software: as Per Client Requirements and Data
- Accessories 2: Tower Fitting
- Accessories 4: Aviation Light
- Accessories 6: Cable
- Trademark: MEGATRO
- Specification: AS PER CLIENTS
- HS Code: 73082000
- Usage: Flying Angle Tower, Crossing Tower, Tension Tower, Angle Tower, Terminal Tower, Transposition Tower, Branching Tower, as Per Client Requirements and Data
- Certification: ISO
- Standard: as Per Client Requirements and Data
- Structure: as Per Client Requirements and Data
- Accessories 1: Tower Foundation
- Accessories 3: Lightning Rod
- Accessories 5: Conductor
- Accessories 7: Insulator
- Transport Package: Export Standard Package
- Origin: Shandong, China
In recent years with rapid extension of city, suburb and rural areas, building new transmission line corridors are often located in the side edge of the road, the air passage will be restricted by the buildings, and tower base will be limited by municipal pipe network facilities.At this condition, many narrow based towers widely use in city power transmission lines. Such towers are good at economic characteristics and reasonable structure, but there are also some tower nodes with insufficient strength, and steel tube tower can be solving some problems. MEGATRO can design, fabricated, installed and maintain 35KV narrow base steel tubular tower.
35KV narrow base steel tubular tower is widely used in city and rural areas power grid. MEGATRO can optimize design, to set a compact, narrow base, the tower design not only advanced but practical, with an emphasis on economic rationality to ensure safe and reliable operation.
MEGATRO is one of the few manufactures who assemble a face of 35KV narrow base steel tubular tower. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies.
After fabrication all narrow base tower are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers.
MEGATRO's narrow base tower systems can accommodate a variety of cross-arm. MEGATRO also offers a wide variety of accessories and mounts.
Availability size: Based on the customer's requirements.
Material: Chinese material or as per clients requirement
Package: Both parties discuss before delivery
Terms of Payment: L/C, T/T
Minimum Order Quantity: 1 set
Port of Loading: Qingdao Port
Lead Time: One month or based on the customer's needs
Performance Standard
Besides conform to the drawing and design, the materials and fabrication of tower components shall conform to the Chinese Standard or other standard which clients can accept.
1. GB/T2694-2003 Transmission line tower - - Technical requirements for manufacturing
2. JGJ81-2002: Technical specification for welding for steel structure of building
3. GB9787-88: Measuring and allowable tolerance for hot-rolled equal angle
4. GB709-88: Measuring and allowable tolerance for hot-rolled plate and strip
5. GB/T699-1999: Quality Carbon Structural Steel
6. GB/T1591-1994: Low alloy high strength structural Steel
7. GB700-88: Carbon Structural Steel
8. GB222-84: Method of sampling steel for determination of chemical composition and permissible variations
9. GB/T228-2002: Method for Tensile testing of metals
10 GB/T232-1999: Method for Bending test of metals
11 GB/T5117-1995: Carbon Welding Rod
12 GB/T5118-1995: Low Alloy Welding Rod
13 GB/T8110-1995: Welding wires for gas shielding arc welding of carbon and low alloy steels
14 GB/T10045-2001: Carbon steel flux cored electrodes for arc welding
15 JB/T7949-1999: Weld outer dimensions for steel construction
16 GB50205-2001: Test Standard for Acceptance of Steel Structure
17 GB/T470-1997: Zinc Ingot
18 GB3098.1-2000: Mechanical properties of fasteners-Part 1: Bolts, screws and studs
19 GB3098.2-2000: Mechanical properties of fasteners-Part2: Nuts, and thread
20 GB3098.3-2000: Mechanical properties of fasteners-Part3: Fastening screw
21 GB/T5780-2000: Helical Bolts Grade C
22 GB/T41-2000: Helical Nuts Grade C
23 GB/T90-2002: Flat Washer Grade C
24 GB/T13912-2002: Metal Coating, Technical Requirement
All in One solar garden light adopts the long life Lithium battery for storing energy. For street light use, security light use, garden light use, road light use,
path light use, parking lot light use, highway light use, park light use, gate light use and so on.
Installation Steps
Step 1: Fasten the solar panel to the support arm with screws and nuts.
Step 2: Fix the lamp onto the wall using setscrews or fix it on the lamp pole using hose clamps.
Angle Adjustment
The solar panel can be adjusted 200 degrees up and down and 240 degrees left and right according to local longitude and latitude and different directions the solar lamp faces, so as to receive sunlight in the maximum receiving surface for the longest time.
Product Parameters
Pictures:
Solar Garden Led Lights,Solar Outdoor Lights,Led Outdoor Landscape Lighting,Outdoor Led Lights
SHENZHEN CHUXU NEW ENERGY TECH CO., LTD. , http://www.szchuxu.com