Tender No.: JC44030020090005
Tendering agent: No other entrusted owner: Unlisted application deadline: 2010-01-27
Area: Guangdong Industry: Water Conservancy Bridge Construction, Electrical and Electronic Equipment
Project Number: JC44030020090005
Project Name: Huaxia Road (Tangming Road - Guangqiao Road) Municipal Engineering Lighting Project LED Street Light Fixture (Re)
Project Location: Huaxia Road, Guangming New District Bidding Method: Open Bidding Evaluation Method: Comprehensive Evaluation Method Bidding Partial Valuation: 1.278 billion yuan Bidding Content:
Including Huaxia Road (Tangming Road - Guangqiao Road) municipal engineering lighting project in the high-power LED street lighting, LED garden lamp pole lamp, the specific work includes LED lighting supply and its installation, commissioning, testing, after-sales warranty, etc. .
Qualification review method: Qualification after trial review deadline: January 17, 2010 at 17:00 Q & A deadline: January 21, 2010 at 17:00 when the closing time: January 27, 2010 9:00 to 11 :00 hours Bidding location: Shenzhen Construction Engineering Transaction Service Center No. 9 window bidding documents for each set of labor costs: 0.00 yuan qualification examination eligibility conditions:
Enterprise qualification requirements: LED lighting manufacturer with independent legal person status in Shenzhen (LED street lighting production base must be in Shenzhen).
Note: Enterprise qualification requirements are set according to Shenfu Office [2009] No. 42
1. Bidder applicants who are suspended during the bidding activities due to collusion bidding or suspected of colluding bids and are being investigated by the competent authorities are not accepted.
2. The copy required in the bidding registration materials must also be provided with originals for inspection.
3. The registration information must be stamped with the official seal of the bidder, and the contact information should be attached and bound into a booklet (must include the fax number and mobile phone number).
Whether to accept the joint bid: No warm tips:
1. Bidder applicants who are suspended during the bidding activities due to collusion bidding or suspected of colluding bids and are being investigated by the competent authorities are not accepted.
2. The bidder must handle the following matters in advance:
(1) Handling information card and bidder's fingerprint collection. For details, please refer to Shenzhen Construction Engineering Transaction Service Network ()
“Guidelines for Handling Information Cards and Bidders' Fingerprint Collection for Shenzhen Construction Engineering Goods and Services Enterprises†in the “Work Guideâ€. In the case of bidding in the form of a consortium, the bidding card of the consortium shall be handled, and the bidder of the main unit shall handle the fingerprint collection. The operation method is the same as above.
(2) To apply for online membership registration, please refer to the “Online Member Application Service Guide†in the “Work Guide†of Shenzhen Construction Engineering Transaction Service Network ().
3. When the bidder submits the bidding documents, the bidder must verify the fingerprint.
4. The relevant provisions for post-qualification review are as follows:
(1) There is no bidding registration link; no bidding meeting is organized; no bidding preparatory meeting (answering meeting) and on-site reconnaissance are organized.
(2) The post-qualification committee established by the tenderer shall conduct the qualification examination of the bidder after the bid opening and before the bid evaluation;
(3) The bidding documents (including design drawings) can be downloaded from the “Members Zone†of the “Shenzhen Construction Engineering Transaction Service Networkâ€. The bidding documents will be charged to the bidder after the bid closing;
(4) The bidder's questioning of the bidding matter shall be filed in the “Shenzhen Construction Engineering Transaction Service Network†in the form of unsigned, and the tenderee shall answer the questions on the Internet, and the Q&A and addendum documents shall be downloaded in the member area.
5. Before the deadline for the closing of the bid, the bidder will bring the following materials to the window No. 9 on the third floor of Design Building No. 8 Zhenhua Road, Futian for the closing of the bidding procedures:
(1) The legal representative or bidder holds the enterprise information card (simultaneous verification of the bidder's fingerprint information); in the form of a joint bid,
The bidder of the joint entity unit holds the joint bid card (simultaneous verification of the bidder's fingerprint information);
(2) Bidding documents (including post-qualification documents).
The KSPOWER brand H series - 4 in 1 dimmable led driver provides 0-10V 1-10V resistance pwm dimmable constant voltage single output LED Drivers with 5 years warranty. The 4 in 1 LED dimmable driver can make the output wattage of MAX 320W and accept 12Volt, 24Volt, 36Volt and 48Volt output voltage optional. The 12v 24v dimmable led driver is Class 2 Class P rated, and both UL/cUL, FCC CE ENEC GS RoHS Listed and SELV style enclosures. The 4 in 1 led bulb drivers is flicker free design and protections for short circuit, over load, over voltage and over temperature. The 4 in 1 dimmable led transformer use low profile aluminum metal housing with IP65 IP67 rating environment protection for indoor or outdoor use, with junction box makes 0-10V 1-10V pwm dimming led driver the power solutions for LED strips, LED sign, billboard and landscape lighting. Featuring built-in PFC function more than 0.95 and outstanding led dimming performance.
led bulb power supply, 24v dimmable led driver, led strip driver, Pwm Driver, led driver enclosure
Shenzhenshi Zhenhuan Electronic Co., Ltd , https://www.szzhpower.com